Skip to main content

A Comprehensive Guide to Installing an Insulated Whole House Fan

You are likely here because you have heard many good things about an insulated whole house fan. It’s an effective way to cool your home, improve indoor air quality, and minimize your use of air-conditioning to save on energy costs. And because it is insulated, you can count on it to efficiently and quietly cool your space so you can sleep and relax without disruptions.

If you’re getting one, it’s important to know how to install it. You can go the DIY route or hire a professional, like a licensed electrician, handyman, or contractor. It depends on how confident you are with your installation skills. Proper installation is important to ensure the fan works efficiently. Plus, the manufacturer won’t be responsible for any faulty installation or any damage that may occur before you install their fan.

If you choose to install the insulated whole house fan yourself, be sure to read these tips:

Prepare for the installation

You will need a drywall saw, power drill, Philips bit, a pencil, and a Phillips screwdriver. With your pencil, go to your attic and mark the place where you want to set up the fan. Make sure there is at least 30” of clearance. Make a cardboard cutout template of the fan to be sure. Then, from below that space, place and mark your cutout template on your ceiling while maintaining a minimum of two inches of clearance around. Using your drywall saw or any similar tool cut the hole.

Installing the fan

Carefully unpack the insulated whole house fan and bring the main assembly into the attic via the crawl hole. Position it near the cutout hole you made through the ceiling. Next, hang the motor head through the rafters and use wood screws to fasten a metal strapping to the rafters. Ensure the damper box is secured to the duct with three black sharp screws.

Check the installation

Peek through the hole to check for twists or kinks in the ducting, then pull the fan’s damper box through the hole. With the drywall screws, fasten the box to the joist in the attic and the drywall.

Install the grille

Position the grille over the fan’s damper box and set it in place with the screws. Go back to the attic and apply the nylon straps and wood screws to support the duct against the framing. This should stabilize the whole insulated whole house fan assembly.

Get installation advice from the experts

Don’t worry, it’s free! Call Whole House Fan at 1-888-229-5757 and one of our experts will help you out.

Source: https://www.wholehousefan.com/blogs/wholehousefans/a-comprehensive-guide-to-installing-an-insulated-whole-house-fan

 

 

Comments

Post a Comment

Popular posts from this blog

How Well Do Whole House Fans and Attic Fans Work?

Should you go for a whole house fan, or are Quiet Cool attic fans the better choice? There’s no correct answer to this question. It all depends on what you need. And if you’re not sure where to start, this guide can help you with the decision. Quiet Cool whole house fans A whole house fan works by pulling air through your open windows and creating negative pressure inside your home, thereby filling your house with fresh and cool outdoor air. Whole house fans are installed with holes cut in the ceiling between the living area and the attic. They should be run only during cooler mornings and evenings. Top-quality whole house fans can reduce your need for air conditioning, significantly reducing your electricity bills. Moreover, they help improve your indoor air quality by removing unpleasant odors, pollutants, and harmful gases. Quiet Cool attic fans Attic fans work similarly to whole house fans , but they only ventilate your attic space (not the entire house). By drawing hot
Post a Comment
Read more

Purchasing a Garage Exhaust Fan to Cool Down Your Garage

Your garage can become unbearably hot at certain times throughout the year, especially in the summer. The rising temperatures and humidity can make it difficult to work or spend time there and may affect the rest of your home. Buying and installing a  garage exhaust fan  can prevent those things from happening. It will improve ventilation, cool the garage, and improve temperatures in the attic above that area. What makes a garage hot? A heated garage occurs when you lack proper ventilation and have attic space above it. Insufficient air flow causes the temperatures to rise in both areas for extended periods. A high-quality  garage exhaust fan  can fix that problem by quietly ventilating and cooling the inside of your garage and the attic space, resulting in a cooler environment. A must-have to increase safety Proper ventilation isn’t merely necessary for a cooler garage and attic. It’s essential to increase safety, especially with gas-fired appliances in the garage. Garage exha
Post a Comment
Read more

Do You Need a Quiet Attic Fan for Your Home?

  Does your home feel hotter than usual even if you turn on the air conditioner? If that’s the case, try checking the temperature in your attic. Hot air can accumulate in that space, affecting the entire house and causing temperatures to rise. So how do you fix this? One solution is to invest in an attic fan. These electrical exhaust systems are installed on your roof or gable and are designed to expel hot air trapped in your attic. Once the warm air is removed, the fan pulls cool and dry air from your living space. If you’re not sure about installing an attic fan, here are some benefits that may convince you: ·          No more moisture Hot air tends to be more humid because it can hold more water. This doesn’t just lead to higher temperatures in your home. Humidity also results in moisture buildup, which can harm your health. For instance, excess moisture promotes the growth of mold and mildew. These organisms are linked to allergic reactions and severe respiratory issues,
Post a Comment
Read more